[Release] ACE v1.0f

Letylove49
Adept
Posts: 278
Joined: Tue Feb 28, 2012 7:47 pm
Location: suisse

Re: [Release] ACE v1.0f

Post by Letylove49 »

thanks for fixing of the time-out issue.
Image





Letylove49 aka Alicia
Se7eN
Novice
Posts: 6
Joined: Thu May 16, 2013 1:27 pm

Re: [Release] ACE v1.0f

Post by Se7eN »

madrixis wrote:Its failing on multihome Linux boxes:

With multihome:
ACE: DEBUG: Default IPv4 WAN NIC = venet0
ACE: DEBUG: Default IPv6 WAN NIC =
ACE: DEBUG: Enabling bListen on NIC venet0:0 (MY_IP) because it is specified in MULTIHOME.
[ACEv10f]: DEBUG: ACE found the following network card: lo
[ACEv10f]: DEBUG: - IPv4 Properties -> Address: 127.0.0.1 - Subnet: - Internet Access: False
[ACEv10f]: DEBUG: - Can listen on this interface? False
[ACEv10f]: DEBUG: ACE found the following network card: venet0
[ACEv10f]: DEBUG: - IPv4 Properties -> Address: 127.0.0.1 - Subnet: - Internet Access: True
[ACEv10f]: DEBUG: - Can listen on this interface? False
[ACEv10f]: DEBUG: ACE found the following network card: venet0:0
[ACEv10f]: DEBUG: - IPv4 Properties -> Address: MY_IP - Subnet: - Internet Access: True
[ACEv10f]: DEBUG: - Can listen on this interface? True
[ACEv10f]: DEBUG: ACE found the following network card: lo
[ACEv10f]: DEBUG: - IPv6 Properties -> Address: :: - Subnet: - Internet Access: False
[ACEv10f]: DEBUG: - Can listen on this interface? False
[ACEv10f]: DEBUG: NICHelper recommends this ListenIP: MY_IP
readlink(/proc/self/exe) = /data/ut-server/System/ucc-bin
Path to the PlayerManager: /data/ut-server/System/PlayerManager/ACEv10f_M
ACE: ERROR - PlayerManager Connection Failed - Timed Out
[ACEv10f]: ERROR: ACE could not spawn the PlayerManager.
[ACEv10f]: ERROR: ACE is now disabled.
ACE: ERROR - PlayerManager Connection Shutting Down!



And without Multihome:

ACE: DEBUG: Default IPv4 WAN NIC = venet0
ACE: DEBUG: Default IPv6 WAN NIC =
[ACEv10f]: DEBUG: ACE found the following network card: lo
[ACEv10f]: DEBUG: - IPv4 Properties -> Address: 127.0.0.1 - Subnet: - Internet Access: False
[ACEv10f]: DEBUG: - Can listen on this interface? True
[ACEv10f]: DEBUG: ACE found the following network card: venet0
[ACEv10f]: DEBUG: - IPv4 Properties -> Address: 127.0.0.1 - Subnet: - Internet Access: True
[ACEv10f]: DEBUG: - Can listen on this interface? True
[ACEv10f]: DEBUG: ACE found the following network card: venet0:0
[ACEv10f]: DEBUG: - IPv4 Properties -> Address: MY_IP - Subnet: - Internet Access: False
[ACEv10f]: DEBUG: - Can listen on this interface? True
[ACEv10f]: DEBUG: ACE found the following network card: lo
[ACEv10f]: DEBUG: - IPv6 Properties -> Address: :: - Subnet: - Internet Access: False
[ACEv10f]: DEBUG: - Can listen on this interface? True
[ACEv10f]: DEBUG: NICHelper recommends listening on all interfaces
readlink(/proc/self/exe) = /data/ut-server/System/ucc-bin
Path to the PlayerManager: /data/ut-server/System/PlayerManager/ACEv10f_M
PlayerManager Uplink Complete!
I'm also getting the "PlayerManager Connection Failed" issue, and it also seems to be related to multihome:
ACE: ERROR - PlayerManager Connection Failed
[ACEv10f]: ERROR: ACE could not spawn the PlayerManager.
[ACEv10f]: ERROR: ACE is now disabled.
ACE: ERROR - PlayerManager Connection Shutting Down!
My server is on GameServers and they force us to use "multihome=@SERVERIP port=@SERVERPORT -nohomedir" in the server's command line. I told them that others with multihome share the same problem, and that with multihome off, ACE worked. Unfortunately, it seems they depend on it. I inquired if I could be switched to a Winblows box and they said they didn't offer any for UT99.
That (multihome) has to stay in the command line, otherwise your server will not work and other clients' services could be impacted as well.

I am sorry, but we do not offer this game on Windows.

Sincerely,

Brendan Kiel
"Dr. Worm[GS]"
Stuck between either changing hosts or waiting for a fix as my only solution, I thought of downgrading to the closest release before 1.0f - however all the downloads I've been able to find, require a password in order to extract the files. After hours of searching online, I finally found this:

http://forums.ut-files.com/post15445.html
ACEv09c is private

I asked AnthraXs who asked me not to make it public so i ave save it and set a password.
Any help is appreciated :)

:help:
User avatar
anth
Adept
Posts: 257
Joined: Thu May 13, 2010 2:23 am

Re: [Release] ACE v1.0f

Post by anth »

A simple update for the server-side .so/.dll file will probably suffice to fix this. I'll try to upload a fix this weekend. Are there any other pressing issues that need to be fixed in the mean time?
Se7eN
Novice
Posts: 6
Joined: Thu May 16, 2013 1:27 pm

Re: [Release] ACE v1.0f

Post by Se7eN »

A simple update for the server-side .so/.dll file will probably suffice to fix this. I'll try to upload a fix this weekend.
There goes my hero, watch him as he goes
/airguitar
User avatar
anth
Adept
Posts: 257
Joined: Thu May 13, 2010 2:23 am

Re: [Release] ACE v1.0f

Post by anth »

I've sent the v1.0g package to some people for testing. Changes in this release include:

Code: Select all

v1.0g:
* [FIXED] Splash logo not appearing in TO
* [FIXED] False positive kicks for system dlls in WINE 2.0
* [FIXED] Autoconfig now properly recognizes all TOST files
* [FIXED] False positive detections of package patches in certain packages (e.g., s_SWAT, BotPack)
* [CHANGED] Made the GameServer<->PlayerManager connection mechanism more robust. This should fix timeout issues with -MULTIHOME (needs testing!!)
Se7eN
Novice
Posts: 6
Joined: Thu May 16, 2013 1:27 pm

Re: [Release] ACE v1.0f

Post by Se7eN »

May I have the new version to test on my server?
RocketJedi
Inhuman
Posts: 851
Joined: Wed Mar 12, 2008 7:14 pm
Personal rank: I.T Master
Location: New York

Re: [Release] ACE v1.0f

Post by RocketJedi »

Se7eN wrote:May I have the new version to test on my server?
+1
https://www.vulpinemission.com
Image Rocket-X8 FLY JETS!
Image MONSTERHUNT w/ NALI WEAPONS 3 + RX8
Image BUNNYTRACK NY
Image SNIPER DEATHMATCH
Image InstaGib + ComboGib + Jailbreak
Image ROSEBUM ROCKET-X RB
forge
Posts: 1
Joined: Sun Jun 10, 2018 8:39 pm

Re: [Release] ACE v1.0f

Post by forge »

i know that at some point the game starts to get faster, but is it possible to increase the fps cap further?
right now its capped at 180, right? eventhough some seem to get 200 somehow (older windows?)
so i guess 200 is fine too? or even a bit higher?
just asking :wink:
RocketJedi
Inhuman
Posts: 851
Joined: Wed Mar 12, 2008 7:14 pm
Personal rank: I.T Master
Location: New York

Re: [Release] ACE v1.0f

Post by RocketJedi »

forge wrote:i know that at some point the game starts to get faster, but is it possible to increase the fps cap further?
right now its capped at 180, right? eventhough some seem to get 200 somehow (older windows?)
so i guess 200 is fine too? or even a bit higher?
just asking :wink:
If I'm not mistaken your question has nothing to do with ACE. 200FPS is the max regardless. Anything above that causes weird game issues.
https://www.vulpinemission.com
Image Rocket-X8 FLY JETS!
Image MONSTERHUNT w/ NALI WEAPONS 3 + RX8
Image BUNNYTRACK NY
Image SNIPER DEATHMATCH
Image InstaGib + ComboGib + Jailbreak
Image ROSEBUM ROCKET-X RB
RocketJedi
Inhuman
Posts: 851
Joined: Wed Mar 12, 2008 7:14 pm
Personal rank: I.T Master
Location: New York

Re: [Release] ACE v1.0f

Post by RocketJedi »

looks like some maps still kicking. This happened to multiple players on the same map.

[ACEv10f]: KickReason.....: Unexpected Package Loaded
[ACEv10f]: PackageName....: CTF-MarsFigherJetsCraterX2
[ACEv10f]: PackagePath....: ../Cache\36F40A9C46A2E6FB540F55B6D796C943.uxx
[ACEv10f]: PackageSize....: 2744342 bytes
[ACEv10f]: PackageHash....: 38D9122BB52A184C679907455663A80F
[ACEv10f]: PackageVer.....: Unknown File
https://www.vulpinemission.com
Image Rocket-X8 FLY JETS!
Image MONSTERHUNT w/ NALI WEAPONS 3 + RX8
Image BUNNYTRACK NY
Image SNIPER DEATHMATCH
Image InstaGib + ComboGib + Jailbreak
Image ROSEBUM ROCKET-X RB
User avatar
anth
Adept
Posts: 257
Joined: Thu May 13, 2010 2:23 am

Re: [Release] ACE v1.0f

Post by anth »

Qwerty wrote:looks like some maps still kicking. This happened to multiple players on the same map.

[ACEv10f]: KickReason.....: Unexpected Package Loaded
[ACEv10f]: PackageName....: CTF-MarsFigherJetsCraterX2
[ACEv10f]: PackagePath....: ../Cache\36F40A9C46A2E6FB540F55B6D796C943.uxx
[ACEv10f]: PackageSize....: 2744342 bytes
[ACEv10f]: PackageHash....: 38D9122BB52A184C679907455663A80F
[ACEv10f]: PackageVer.....: Unknown File
This issue was fixed in an updated version of PackageHelper v1.3. I bundled it with one of the latest versions of ACE (might have been v1.0f?). Don't forget to unzip/overwrite all files!
User avatar
anth
Adept
Posts: 257
Joined: Thu May 13, 2010 2:23 am

Re: [Release] ACE v1.0f

Post by anth »

there were some hiccups while testing v1.0g. I fixed them and will release v1.0h soon.

Change log:

Code: Select all

v1.0h:
* [FIXED] ACE breaking the HUDMutator chain in some game types
* [FIXED] Map switches taking a long time when the server is handling a lot of traffic

v1.0g:
* [FIXED] Splash logo not appearing in TO
* [FIXED] False positive kicks for system dlls in WINE 2.0
* [FIXED] Autoconfig now properly recognizes all TOST files
* [FIXED] False positive detections of package patches in certain packages (e.g., s_SWAT, BotPack)
* [CHANGED] Made the GameServer<->PlayerManager connection mechanism more robust. This should fix timeout issues with -MULTIHOME (needs testing!!)

RocketJedi
Inhuman
Posts: 851
Joined: Wed Mar 12, 2008 7:14 pm
Personal rank: I.T Master
Location: New York

Re: [Release] ACE v1.0f

Post by RocketJedi »

anth wrote:
Qwerty wrote:looks like some maps still kicking. This happened to multiple players on the same map.

[ACEv10f]: KickReason.....: Unexpected Package Loaded
[ACEv10f]: PackageName....: CTF-MarsFigherJetsCraterX2
[ACEv10f]: PackagePath....: ../Cache\36F40A9C46A2E6FB540F55B6D796C943.uxx
[ACEv10f]: PackageSize....: 2744342 bytes
[ACEv10f]: PackageHash....: 38D9122BB52A184C679907455663A80F
[ACEv10f]: PackageVer.....: Unknown File
This issue was fixed in an updated version of PackageHelper v1.3. I bundled it with one of the latest versions of ACE (might have been v1.0f?). Don't forget to unzip/overwrite all files!
yeah the update fixed all the maps we reported initially. This one still kicking though. I will test on my own if I ever get time. :loool:
https://www.vulpinemission.com
Image Rocket-X8 FLY JETS!
Image MONSTERHUNT w/ NALI WEAPONS 3 + RX8
Image BUNNYTRACK NY
Image SNIPER DEATHMATCH
Image InstaGib + ComboGib + Jailbreak
Image ROSEBUM ROCKET-X RB
User avatar
UT Sniper (SJA94)
Inhuman
Posts: 756
Joined: Thu Jun 24, 2010 10:35 pm
Personal rank: Retard
Location: England

Re: [Release] ACE v1.0f

Post by UT Sniper (SJA94) »

How do you stop the latest ACE forcing 167fps with highperftoggle off?

I have mine set up to 195fps limit, and it feels great, but as soon as I go into the servers that run the new ACE it forces my fps to 167 no matter what I set it to and it's makes the game fell horrible. This is not an XC_Engine problem, it's an ACE problem because it does it with or without XC_Engine installed. This is without highperftoggle on.
User avatar
anth
Adept
Posts: 257
Joined: Thu May 13, 2010 2:23 am

Re: [Release] ACE v1.0f

Post by anth »

UT Sniper (SJA94) wrote:How do you stop the latest ACE forcing 167fps with highperftoggle off?

I have mine set up to 195fps limit, and it feels great, but as soon as I go into the servers that run the new ACE it forces my fps to 167 no matter what I set it to and it's makes the game fell horrible. This is not an XC_Engine problem, it's an ACE problem because it does it with or without XC_Engine installed. This is without highperftoggle on.
How did you configure the 195 limit? Did you use one of the UTGLR renderers and set the frameratelimit variable?

There's a couple of things that could be causing your framerate to cap at 195:
- ACE currently caps the frameratelimit at 180fps. I can raise that cap a little bit, but there needs to be a cap for security reasons. UT has some glitches that cause players with higher framerates to run faster. This effect is barely noticable at "low" framerates, but becomes really obvious once you move beyond 180.
- Your netspeed also caps the framerate. UT's main game loop renders a frame and sends out a 64-byte packet in every iteration. This means that if your netspeed is X, then the maximum framerate your game can run at will be X / 64. With a netspeed of 6400, your maximum framerate would be 100fps.
- Similarly, the server's maxclientrate also caps your framerate. Setting the maxclientrate limits how much data each client can send to the server per second. With a maxclientrate of X, everyone's netspeed would be capped at X, and this limits your framerate to X / 64.