What do you use to upload the video to youtube?

Discussions about everything else
User avatar
Chamberly
Godlike
Posts: 1963
Joined: Sat Sep 17, 2011 4:32 pm
Personal rank: Dame. Vandora
Location: TN, USA
Contact:

What do you use to upload the video to youtube?

Post by Chamberly »

I'm wondering if those with good quality upload would share some details.

Right now I'm using Fraps, and Virtual Dub to compress the vid using the Xvid MPEG-4 Codec but with this set, youtube gives a weird effect with this and it doesn't look as good as the original. Which sucks. The texts are less visible, & the colors are a bit off, for the most part.

Is there any other codec I should use to set up in Virtual Dub? Or some other source?
Image
Image
Image Edit: Why does my sig not work anymore?
JackGriffin
Godlike
Posts: 3774
Joined: Fri Jan 14, 2011 1:53 pm
Personal rank: -Retired-

Re: What do you use to upload the video to youtube?

Post by JackGriffin »

You can dispense with all that and use this:
tpsMCXQBSk8

It's free and works fantastic. FPS takes no hits when it runs on my rig.
So long, and thanks for all the fish
User avatar
Chamberly
Godlike
Posts: 1963
Joined: Sat Sep 17, 2011 4:32 pm
Personal rank: Dame. Vandora
Location: TN, USA
Contact:

Re: What do you use to upload the video to youtube?

Post by Chamberly »

Cool, I'll give it a try.

Hoping it'll work on non-MSI products. :P

1 question, after recording, does it need to be compressed (like how frap files needed to be) or the file is already in a nice size to upload?
Last edited by Chamberly on Sun Jun 25, 2017 10:05 pm, edited 1 time in total.
Image
Image
Image Edit: Why does my sig not work anymore?
User avatar
rjmno1
Masterful
Posts: 716
Joined: Fri Aug 12, 2011 9:38 pm
Personal rank: masterfull
Location: https://sites.google.com/view/unrealtou ... oject/home
Contact:

Re: What do you use to upload the video to youtube?

Post by rjmno1 »

Well i Always use divx as compiling the videofarmats to another bether one.
If you wanna use a bether setup for your videofiles you can use the converter from divx ,and use mkv as your output file.
Then the quality must be much bether and sharper.
hope this will helps with your troubleshooting mp4 file format.

http://www.divx.com/

download now.

http://www.divx.com/en/software/divx
Btw virthualdub sucks its to complex and takes a long time for converting another file-format.
YouTube supports a very wide range of video-file formats.
unreal tournament 99
®
Image
Image
ImageImage
https://sites.google.com/view/unrealtou ... oject/home mine home ut99 website.
https://richardmoust105.blogspot.com/20 ... ef-in.html dutch blog page about ut99 settings.
User avatar
Chamberly
Godlike
Posts: 1963
Joined: Sat Sep 17, 2011 4:32 pm
Personal rank: Dame. Vandora
Location: TN, USA
Contact:

Re: What do you use to upload the video to youtube?

Post by Chamberly »

Hey rjmno1!

As far I know, frap files I made are .avi files.

I did find out that a random software add-on I set up on my other pc does record into .mp4 though.

Will check it out too, thanks!
Image
Image
Image Edit: Why does my sig not work anymore?
JackGriffin
Godlike
Posts: 3774
Joined: Fri Jan 14, 2011 1:53 pm
Personal rank: -Retired-

Re: What do you use to upload the video to youtube?

Post by JackGriffin »

Afterburner is a controller for certain video cards that allows you to overclock, etc. However it doesn't *need* to do any of that to also be a fantastic video capture program. Tons of people use it for that reason only and don't connect it at all with their video drivers (I am one). It beats Fraps in every metric and I've not found another free product that even comes close to what you get with AB. I capture and go directly to YT without doing anything aside from normal edits if the video needs them. Compression, sync, color is always just fine once you choose your settings.
So long, and thanks for all the fish
User avatar
Dr.Flay
Godlike
Posts: 3347
Joined: Thu Aug 04, 2011 9:26 pm
Personal rank: Chaos Evangelist
Location: Kernow, UK
Contact:

Re: What do you use to upload the video to youtube?

Post by Dr.Flay »

First an answer to the title
2 easy to use uploader tools
http://z-o-o-m.eu
https://www.dvdvideosoft.com/products/d ... loader.htm

Whatever format you use, Youtube will re-compress it into MP4 and WEBM.
The colour changes are probably due to it being a 3rd generation recode.
If the colour information is converted into different types it can start to drift if the formats are not similar.
If you know what you are doing with tools like VirtualDub then you can possibly keep the colour info in the same format across different compressions, so all you get is degraded quality not colour.

Fraps saves in an uncompressed or low compression format to keep quality as a "lossless" format.
It is saved in a standard AVI container so almost all tools can recode it.
Many other formats can go inside an AVI such as DivX and Xvid, but these are ageing formats that most people who want quality have long abandoned. (DivX is a commercial project, XviD is a reverse-engineered free DivX)
eg. Traditionally a DVD would be split across 2 AVIs if you want a high quality DivX/Xvid copy, but saved as an H.264/AVC MP4 you can fit the whole DVD into 1 CD sized file and have full quality, plus chapter marks, subtitles and extra audio track.

H.264 MP4 is the standard video format of the Web, because it is smaller and can be streamed (unlike AVI)
For many years GFX cards have had the ability to decode/encode H.264 files in hardware (since DirectX 9), so you don't see any CPU load.
Good capture software will use your GPU to do the work and save directly as MP4 with no recoding.
MSI Afterburner "Predator" should use your GPU.
This means you should be able to capture at a high resolution and bitrate, and so not suffer as much when youtube recodes it.

Note: H.256 is gradually gaining more ground as the next replacement, since H.246 is already many years old.
User avatar
rjmno1
Masterful
Posts: 716
Joined: Fri Aug 12, 2011 9:38 pm
Personal rank: masterfull
Location: https://sites.google.com/view/unrealtou ... oject/home
Contact:

Re: What do you use to upload the video to youtube?

Post by rjmno1 »

@drflay

Well you can login into YouTube and upload from there, u dont need a 3 party software to upload your videofile.
unreal tournament 99
®
Image
Image
ImageImage
https://sites.google.com/view/unrealtou ... oject/home mine home ut99 website.
https://richardmoust105.blogspot.com/20 ... ef-in.html dutch blog page about ut99 settings.
User avatar
Dr.Flay
Godlike
Posts: 3347
Joined: Thu Aug 04, 2011 9:26 pm
Personal rank: Chaos Evangelist
Location: Kernow, UK
Contact:

Re: What do you use to upload the video to youtube?

Post by Dr.Flay »

Obviously you can use the web interface, but if you want to batch upload, or upload for many hours, then keeping a tab open in a browser using many hundreds of MB is not the wisest option if it can be done in tens of MB, and less risk of crashing or accidental closure.
Currently I am using Fileuploader to put 5GB of video data into my Mediafire drive, and when finished it will switch off the PC.
ETA. 7h 30m
nogardilaref
Masterful
Posts: 577
Joined: Tue Jun 20, 2017 1:00 pm
Personal rank: ⚋⚊⚌☰⚞⌖⚟☰⚌⚊⚋

Re: What do you use to upload the video to youtube?

Post by nogardilaref »

Not sure about the end quality these days, but if you use Twitch, you can directly upload the stream to Youtube as well from there.
Then again, the last time I used it myself was years ago, and the quality wasn't that good, but might be because I didn't really stream in FullHD either.
User avatar
Nephew9999
Adept
Posts: 288
Joined: Wed Jul 06, 2011 11:20 am

Re: What do you use to upload the video to youtube?

Post by Nephew9999 »

try this combination
-use fraps to rec your vid..
http://www.fraps.com/download.php
-use camtasia studio to edit or compile your video as avi or mp4 etc
https://www.techsmith.com/video-editor.html
-use handbreak to compress the size from vid file
https://handbrake.fr/

- thats what i do
https://www.youtube.com/user/MatterX9
:thuup:
User avatar
rjmno1
Masterful
Posts: 716
Joined: Fri Aug 12, 2011 9:38 pm
Personal rank: masterfull
Location: https://sites.google.com/view/unrealtou ... oject/home
Contact:

Re: What do you use to upload the video to youtube?

Post by rjmno1 »

That handbrake software is very good.
I,m now testing it out with also some subtitels.
That program looks good and its not so big in megabites i mean.
Thanks for sharing.
thanks nephew
unreal tournament 99
®
Image
Image
ImageImage
https://sites.google.com/view/unrealtou ... oject/home mine home ut99 website.
https://richardmoust105.blogspot.com/20 ... ef-in.html dutch blog page about ut99 settings.
User avatar
FXANBSS
Skilled
Posts: 231
Joined: Thu Dec 26, 2013 7:03 pm

Re: What do you use to upload the video to youtube?

Post by FXANBSS »

Well, in my case, I actually just use Nvidia Shadowplay.

It's got incredible quality and it's very time-saving.

Though I'm not completely satisfied with it. Should I have to increase the bitrate? (It is 50 mbps)
Or Should I have to increase the game brightness? (Though I prefer to keep brightness default always) :P


Well, here's a video example, I still consider it as great quality, before I utilized Fraps and I uploaded the entire (AVI) video without compressing it, it was bad quality, I guess for the 720p res.
Well this one here is 1080p60 with Nvidia Shadowplay.
If you look at the dark parts, it's got some weird squares probably by the degrading quality?
Rate me please, I also want to learn a bit more. :mrgreen:
[youtube]wBVBDh2Rm1U[/youtube]

By the way the framerate is a little variable so I guess i shouldn't worry of increasing more the quality because it already looks balanced to me, this is my opinion.
User avatar
Nephew9999
Adept
Posts: 288
Joined: Wed Jul 06, 2011 11:20 am

Re: What do you use to upload the video to youtube?

Post by Nephew9999 »

rjmno1 wrote:That handbrake software is very good.
I,m now testing it out with also some subtitels.
That program looks good and its not so big in megabites i mean.
Thanks for sharing.
thanks nephew
your welcome! mate! :tu:
User avatar
rjmno1
Masterful
Posts: 716
Joined: Fri Aug 12, 2011 9:38 pm
Personal rank: masterfull
Location: https://sites.google.com/view/unrealtou ... oject/home
Contact:

Re: What do you use to upload the video to youtube?

Post by rjmno1 »

rjmno1 wrote:Well i Always use divx as compiling the videofarmats to another bether one.
If you wanna use a bether setup for your videofiles you can use the converter from divx ,and use mkv as your output file.
Then the quality must be much bether and sharper.
hope this will helps with your troubleshooting mp4 file format.

http://www.divx.com/

download now.

http://www.divx.com/en/software/divx
Btw virthualdub sucks its to complex and takes a long time for converting another file-format.
YouTube supports a very wide range of video-file formats.
founded also some converting software called mediacoder together with nephew founded software called handbrake, you can handle any format and container video or audio files.
supporting almost any file types.

http://www.mediacoderhq.com/ :gj:
unreal tournament 99
®
Image
Image
ImageImage
https://sites.google.com/view/unrealtou ... oject/home mine home ut99 website.
https://richardmoust105.blogspot.com/20 ... ef-in.html dutch blog page about ut99 settings.
Post Reply