CTF-XV-BloodGulch

[Buggie]

Rework for CTF with X-Vehicles this map:
https://unrealarchive.org/maps/unreal-t ... a5b59.html

This map need XVehicles at least v41 for load:
viewtopic.php?f=34&t=14936

CTF-XV-BloodGulchV6.7z

(3.36 MiB) Downloaded 41 times

Spoiler

Old madness with overpowered tanks:

CTF-XV-BloodGulchV5.7z

(3.31 MiB) Downloaded 37 times

[OjitroC]

Great fun with tanks in this map - is it my imagination or do the tanks take more damage/have weaker armour than in MH?

[Buggie]

Not imagination. There no MH improvement, so Jeeps shoot weaker, and all vehicles almost no armor and receive 100% damage, except some cases.

[Buggie]

v1

- add fix gun instead of pulse gun on middle of the map.
- add ambient sounds.
- add grass.
- remake skybox for Halo match.
- add some lights.
- rework teleports for Halo match.

Updated (screenshots too) at first post: viewtopic.php?f=5&t=15042

[OjitroC]

Changes to the map are good - make it somewhat different to the original - ambient sounds are good as well, and add to the atmosphere of the 'place'.

The only thing is I think some glitches have been introduced - at least I don't remember them in the previous version (though I could be wrong of course) :

This is in the sky on the extreme right of the shot - it's peripheral and disappears when looked at directly (i think there are others elsewhere but they are difficult to capture, perhaps they are not that important)

Sliding textures - to the right of the Blue base when viewed from behind it - this glitch is more readily noticed and extends to the sand area moving as well sometimes

[Buggie]

It is very minor issues. Map consis from one brush. So almost uneditable. I just do something or rebuild with different settings and prey for this build be less bugs from previous.
For example, when stood on red base roof it disappear.

There exists a lot invisible obstacles which stop tank. Sometimes even player collide with it. But in general map in playable state.

Skybox I will fix later. (If you see clouds disappear - this bug).

[Buggie]

v2

- Add marks on each base for distinguish it more easily.
- Change respawn places.
- Swap GK-1 and Kraht.
- Adjust vehicles location.
- Setup AlternatePaths for make more random in bot play.
- Learn bot not use teleport way, when inside vehicle.
- Fix some paths.
- Improved design of teleport destionations.
- Increased cloud sphere size.

Updated at first post: viewtopic.php?f=5&t=15042

[Buggie]

v3

- Better planet textures.
- Better paths between bases.
- Added XVehiclesCTF mutator on map - Now require XVehicles at least v6!

Updated at first post: viewtopic.php?f=5&t=15042

[sektor2111]

- Better paths between bases.

No...

Code: Select all

DevPath: 1000 navigation nodes searched from AlternatePath0!
DevPath: 1000 navigation nodes searched from AlternatePath4!
DevPath: 1000 navigation nodes searched from AlternatePath4!
DevPath: 1000 navigation nodes searched from AlternatePath0!
DevPath: 1000 navigation nodes searched from AlternatePath0!
XC_Engine: === Last line repeats 2 times.
DevPath: 1000 navigation nodes searched from AlternatePath4!
XC_Engine: === Last line repeats 2 times.
DevPath: 1000 navigation nodes searched from AlternatePath0!
XC_Engine: === Last line repeats 2 times.

because

1581_IsOverload.PNG (7.51 KiB) Viewed 729 times

resulting

Code: Select all

XC_Counter: Total ReachSpecs found = 29884

Not even XC stuff cannot manage these well. I see nodes in map entirely without purpose as they are hard to reach and without incoming connections.

Edit:
Perhaps 436 stock players can see what kind of navigation is here...

Code: Select all

DevPath: 1000 navigation nodes searched from FlagBase0!
DevPath: 1000 navigation nodes searched from FlagBase0!
DevPath: 1000 navigation nodes searched from FlagBase1!
DevPath: 1000 navigation nodes searched from FlagBase0!
DevPath: 1000 navigation nodes searched from FlagBase0!
DevPath: 1000 navigation nodes searched from FlagBase0!
DevPath: 1000 navigation nodes searched from AlternatePath1!
DevPath: 1000 navigation nodes searched from FlagBase0!
DevPath: 1000 navigation nodes searched from FlagBase0!
DevPath: 1000 navigation nodes searched from FlagBase1!
DevPath: 1000 navigation nodes searched from FlagBase0!
DevPath: 1000 navigation nodes searched from FlagBase0!
DevPath: 1000 navigation nodes searched from PathNode108!
DevPath: 1000 navigation nodes searched from InventorySpot672!
DevPath: 1000 navigation nodes searched from PathNode7692!
DevPath: 1000 navigation nodes searched from InventorySpot672!
DevPath: 1000 navigation nodes searched from AlternatePath5!
DevPath: 1000 navigation nodes searched from FlagBase0!
DevPath: 1000 navigation nodes searched from FlagBase0!
DevPath: 1000 navigation nodes searched from FlagBase1!

And here it needs a note, this map is only for UT 469b and above, 436 doesn't include a lot of activity.

[Buggie]

v4

- Better paths.
- Now require XVehicles at least v11!

Updated at first post: viewtopic.php?f=5&t=15042

[f7r]

Such nostalgia, especially because of Website Down
Sometimes the vehicles begin kind of to shiver or flicker. Both from the outside and inside until it respawn.

[Buggie]

v5

- Add heli on each base.
- Now require XVehicles at least v13!

Updated at first post: viewtopic.php?f=5&t=15042

[EvilGrins]

By the by, there's something off about the doors of the 2 bases. Noticed as I was running for my life, but if you don't run straight out of them you tend to get hung up on the sides.

[Buggie]

Yes, there few invisible collisions / bsp bugs on exit from some bases. Not sure if can be fixed - entire map is single semi-solid almost uneditable brush.

---

Automatically merged

Wow. Suddenly discover original map topic: viewtopic.php?f=5&t=2869

[Gustavo6046]

If you right-click a vertex in the brush (iirc it turns it into a pivot), you can hold down Alt to move it in a 2D viewport, without changing to Vertex Edit Mode

Note: I remember that making a vertex into a pivot can auto-snap it to a grid size. Make sure to disable snapping before right-clicking to select a vertex, then re-enabling it before moving said vertex. Although usually it's better to simply have them already aligned to the grid beforehand