Page 8 of 10
Re: Bat1.PlayDeathHit
Posted: Wed Sep 01, 2021 6:08 pm
by EvilGrins
Barbie wrote: ↑Wed Sep 01, 2021 1:07 pmI used class'Bird1' from UnrealShare.u instead and set the MultiSkin manually.
That's what I usually do... though I'm still clearing up the background on that bottom one.
Re: Error Messages (solved)
Posted: Wed Sep 01, 2021 8:00 pm
by Barbie
Whow, it is the first time I got this error:
---------------------------
Critical Error
---------------------------
General protection fault!
History: UGameEngine::LoadMap <- AttemptLoadPending <- TickPending <- UGameEngine::Tick <- UpdateWorld <- MainLoop
- GPF.jpg (19.19 KiB) Viewed 1214 times
It happens when I try to connect to my test server running a new map. It happens with v436 as well as v469c. Ther are no concerning messages in the server log, the maps runs fine on server. If I start other maps on server, I can connect without problems.
...
DevNet: PendingLevel received: WELCOME LEVEL=MH-Malus_Keep+SBMod(beta) LONE=1
DevNet: Welcomed by server: LEVEL=MH-Malus_Keep+SBMod(beta) LONE=1
Log: LoadMap: myUT99Server.office.local/MH-Malus_Keep+SBMod(beta)?Name=Barbie?Class=BotPack.TFemale1?team=0?skin=FCommandoSkins_Negaverse_Titus.ttus?Face=FCommandoSkins_Negaverse_Titus.titus?Voice=BotPack.VoiceFemaleTwo?OverrideClass=
DevAudio: Cluster SetViewport: WindowsViewport0
Init: Shut down moving brush tracker for Level CityIntro.MyLevel
Critical: UGameEngine::LoadMap
Critical: AttemptLoadPending
Critical: TickPending
Critical: UGameEngine::Tick
Critical: UpdateWorld
Critical: MainLoop
Exit: Executing UObject::StaticShutdownAfterError
Exit: Executing UWindowsClient::ShutdownAfterError
Exit: Cluster shut down after error.
Log: DirectDraw End Mode
Exit: UD3D9RenderDevice::ShutdownAfterError
Exit: Exiting.
Log: Log file closed, 09/01/21 20:54:49
<EDIT>
Forgot to mention: the map runs local without problems.
</EDIT>
<EDIT 2>
Found the mistake: LevelInfo.bLonePlayer was set tor TRUE
Stock code says:
Code: Select all
var() bool bLonePlayer; // No multiplayer coordination, i.e. for entranceways.
</EDIT 2>
Re: Error Messages
Posted: Sat Jun 18, 2022 6:23 am
by EvilGrins
This is one of those little things that doesn't happen all the time, just like every other time I play. Sometimes only once every few plays.
What does it mean and any ideas on how to make it happen less often?
Re: Error Messages
Posted: Sat Jun 18, 2022 8:43 am
by Barbie
EvilGrins wrote: ↑Sat Jun 18, 2022 6:23 am
FatSkaarjZombie
What package is it in?
Re: Error Messages
Posted: Sat Jun 18, 2022 10:23 am
by OjitroC
Barbie wrote: ↑Sat Jun 18, 2022 8:43 am
What package is it in?
MUPawns.u
EvilGrins wrote: ↑Sat Jun 18, 2022 6:23 am
This is one of those little things that doesn't happen all the time, just like every other time I play. Sometimes only once every few plays.
What does it mean and any ideas on how to make it happen less often?
I think that that error has been fixed in 469 but I'm not sure.
I can't reproduce it (playing for about 20 minutes with the FatSkaarjZombie spawned by MonsterSpawn) - though I'm not playing the map you're using it in of course.
The MUPawns package is buggy - huge skaarj pawn, marine with no mesh, Skrag with no anims, gizmo as a sprite, etc, etc - or unfinished - so there may well be coding and other errrors in it.
If that crash keeps on happening then the only real way to stop it is not to use that particular pawn.
Re: Error Messages
Posted: Sat Jun 18, 2022 10:43 am
by Barbie
It looks looks the runaway loop happens when a FatSkaarjZombie sees a ScriptedPawn with AttitudeToEnemy == ATTITUDE_Friendly that is first found in Level.PawnList. The function FatSkaarjZombie.WhatToDoNext() calls ScriptedPawn.Attacking.ChooseAttackMode() what calls WhatToDoNext() then -> endless loop.
Try setting FatSkaarjZombie.bIgnoreFriends to TRUE in property section "AI" to avoid that endless loop.
Re: Error Messages
Posted: Sat Jun 18, 2022 5:46 pm
by EvilGrins
OjitroC wrote: ↑Sat Jun 18, 2022 10:23 amI can't reproduce it (playing for about 20 minutes with the FatSkaarjZombie spawned by MonsterSpawn) - though I'm not playing the map you're using it in of course.
You'll likely get a chance soon... I may move them from the main path to one of the corner towers, so less will be spawned and hopefully that'll limit the chances of it happening again.
Re: Error Messages
Posted: Sat Jun 18, 2022 6:55 pm
by OjitroC
EvilGrins wrote: ↑Sat Jun 18, 2022 5:46 pm
OjitroC wrote: ↑Sat Jun 18, 2022 10:23 amI can't reproduce it (playing for about 20 minutes with the FatSkaarjZombie spawned by MonsterSpawn) - though I'm not playing the map you're using it in of course.
You'll likely get a chance soon... I may move them from the main path to one of the corner towers, so less will be spawned and hopefully that'll limit the chances of it happening again.
If you are doing an XVehicles version and the FatSkaarjZombies are only spawned if someone goes into one of the towers, then it may not happen at all if players don't need to go into those towers.
I've got FSZs in MonsterSpawn and have not encountered any issues with them after quite a few plays - I did what Barbie suggested and set bIgnoreFriends to True. In fact I have all of the useable MUPawns in MonsterSpawn and they're all fine - the GhostSkaarj is problematic but only because it is invisible basically and only noticeable by the sound it makes when attacking one!
Re: Error Messages
Posted: Wed Jul 20, 2022 10:57 pm
by OjitroC
Got the following error (in DM-AmericanSuburbsDaylight) - any idea what might cause it?
Log wrote:Critical: FLightManager::SetupForActor
Critical: URender::DrawLodMesh
Critical: (LodMesh Botpack.BioGelm)
Critical: DrawMesh
Critical: URender::DrawActorSprite
Critical: URender::DrawFrame
Critical: URender::DrawWorld
Critical: UGameEngine::Draw
Critical: UWindowsViewport::Repaint
Critical: UWindowsClient::Tick
Critical: ClientTick
Critical: UGameEngine::Tick
Critical: UpdateWorld
Critical: MainLoop
Exit: Executing UObject::StaticShutdownAfterError
Exit: Executing UWindowsClient::ShutdownAfterError
Exit: UGalaxyAudioSubsystem::ShutdownAfterError
Log: DirectDraw End Mode
Exit: UOpenGLRenderDevice::ShutdownAfterError
Exit: Exiting.
In 469b, using the EXUOpenGLDrv renderer and playing MonsterSpawn - none of the ScriptedPawns has a weapon that fires the Botpack.UT_BioGel/BioGlob projectiles that use the BioGelm mesh and there are no default UT weapons in the map, everything being replaced (by StuffSwapper) with CounterStrike weapons - these are all bullet-firing weapons.
I recall getting this error before so I don't think it is related to the map - actually got it in this map (
viewtopic.php?f=5&t=14420).
Re: Error Messages
Posted: Thu Jul 21, 2022 4:08 am
by EvilGrins
OjitroC wrote: ↑Wed Jul 20, 2022 10:57 pmplaying MonsterSpawn - none of the ScriptedPawns has a weapon that fires the Botpack.UT_BioGel/BioGlob projectiles
What monsters do you have in your selection of MonsterSpawn? Maybe it's not a projectile.
I know the keekalien.alienpawn, for example, when it dies it sprays the area near where it died with that projectile; for the alien acid effect.
Re: Error Messages
Posted: Thu Jul 21, 2022 10:10 am
by OjitroC
EvilGrins wrote: ↑Thu Jul 21, 2022 4:08 am
What monsters do you have in your selection of MonsterSpawn? Maybe it's not a projectile.
I know the keekalien.alienpawn, for example, when it dies it sprays the area near where it died with that projectile; for the alien acid effect.
At the moment, mostly ScriptedHumans, subclassed from Skaarj - along with some actual Skaarj-warrior types. So I don't think it's that but that's not something I had thought about.
Yes, that got me thinking - I use NWUltraGoreSSEb and this uses the BioGelm mesh (though I don't know where as there are a lot of classes to look through) - so this is where that mesh comes from.
What remains unclear is why that should cause the fatal error.
Re: Error Messages
Posted: Sat Oct 08, 2022 9:21 pm
by OjitroC
Got the same error again - this time in DM-(LAGG)MountainCity - with a different renderer (D3D9) and a different set of ScriptedPawns, none of which uses a weapon with, or fires, a projectile with the BioGelm mesh. So still no idea about what causes the error beyond the possibility that it is linked to NWUltraGoreSSEb.
Re: Error Messages
Posted: Sat Oct 15, 2022 1:50 pm
by Forum|User
Having an error message in UnrealEd 2.2 after "Build All". The problem came out of nowhere, it suddenly broke down.
Probléma-aláírás:
Problémaesemény neve: AppHangB1
Alkalmazásnév: UnrealEd.exe
Alkalmazás verziója: 2.2.0.0
Alkalmazás időbélyegzője: 62ed4246
Lefagyási aláírás: 3175
Lefagyás típusa: 0
Operációs rendszer verziója: 6.1.7601.2.1.0.256.1
Területibeállítás-azonosító: 1038
1. további lefagyási aláírás: 3175451f4de4d8218bee313b06f6c9d0
2. további lefagyási aláírás: d4ba
3. további lefagyási aláírás: d4ba50f80716623b8531547da1ce4057
4. további lefagyási aláírás: 3175
5. további lefagyási aláírás: 3175451f4de4d8218bee313b06f6c9d0
6. további lefagyási aláírás: d4ba
7. további lefagyási aláírás: d4ba50f80716623b8531547da1ce4057
Re: Error Messages
Posted: Sat Oct 15, 2022 2:20 pm
by Buggie
Need more info. If this each time on build particular map - need attach this map with all assets to post.
Or show any other way for reproduce it.
Re: Error Messages
Posted: Sat Oct 15, 2022 5:23 pm
by sektor2111
227 is now a mix with 469 ? Interesting "backward compatibility"...